Guide to get Chevrolet Aveo 2012 security pin code and add a remote folding key by using SKP1000 key programmer.
Vehicle & Key Information:
Vehicle: Chevrolet Aveo 2012
Original key: 3-button remote folding key
Frequency: 315MHz
Chip: ID46
Original key: 3-button remote folding key
Frequency: 315MHz
Chip: ID46
Folding key to be programmed: use KD900 remote maker to generate KD remote NB07-ETT-GM
Remote programming: automatively generate remote when program success
Security pin code: required
Device: SKP1000 tablet car key programmer
Remote programming: automatively generate remote when program success
Security pin code: required
Device: SKP1000 tablet car key programmer
Procedure:
Step 1: Get Pin Code
Dissamble Aveo BCM (Body Control Module) under the dashboard
Find out and locate 25160 chip
4-digit pin code is displayed in Line 000A0: “1904”
Step 2: Program key
Connect SKP1000 car key programmer with vehicle via OBD socket
Turn ignition to ON position
Select GM-> Chevrolet->Aveo->Key Programming->Immobilizer system
Choose OBDII connector
Turn ignition OFF
SKP1000 display current key number: 2
Select Program Key function
Turn ignition ON
Enter 4-digit immobilizer pin code just read
Configuring system, please wait for about 10 minutes
Turn ignition OFF
Remove the key
Open and close the door on the driver side
Close all electronic equipments
Press YES to continue
Turn ignition ON
SKP1000 prompts “Whether to program next key?” which means the first key has been successfully programmed.
Press YES and follow steps above to add 2nd key, press NO to go back.
Test the new remote folding key.
