SKP1000 Tablet Key Programmer: July 2017

Friday, July 28, 2017

SKP1000 Read Fiat Siena ISO code and Program Key via OBD

Older Fiat Siena or Palio required to remove ECU or write key to start to make new key. Here is revolutionary solution on getting Fiat ECU ISO code and programming special ID48 chip key by using SKP1000 key programmer via OBD directly. SKP1000 tablet=SKP900+ Lonsdor CI600 Plus.

Instruction:

Step 1: Read ECU ISO code (security pin code)

Select car brand: Fiat

Select read iso code

Select Electronic immobilizer system

Select read iso code

After read ecu iso code success, disconnect the battery.
If read iso code failed,please disconnect the battery and try again
(Anyway, disconnect the battery)

SKP-1000 read Fiat info and fiat iso code
Press YES to continue

Check if you have a working key
If yes, Press YES button to continue

Turn ignition to ON position

Turn ignition to OFF position

Turn Ignition ON

Read iso code success

manually enter 5-digit iso code

SKP1000 will read the immo data, please write download the numbers (will be used to generate chip)

Step 2. Generate Fiat special ID48 chip

Select Fiat common chip to generate special chip

select generate Fiat ID48 special dealer key

Insert the immo adapter into the SKP1000 car key programmer, select Special function and select Generate Fiat chip

Insert the blank ID48 chip into the coil of the adapter

Manually enter 24-digit immo code (read previously)

Enter 24-digit code marked red

confirm the entered digits

Step 3: Program chip key

select Program key

Select Siena key programming,
SKP1000 will also program key for Fiat 500, Boyue,Palio,Leap,viaggio and Perla

Select Electronic immobilizer system

Select OBDII connector
turn ignition to ON position

select Program key

Key without programming cannot be used

Press YES to continue

enter 5 digits iso code
confirm

continue to program more keys

Press YES to continue

please change next key

If the dashboard indicator goes off, program success.
Disconnect SKP 1000 and test the new key.

http://www.obdii365.com/wholesale/skp1000-auto-key-programmer.html

Thursday, July 27, 2017

SKP1000 Program Freelander 2 year 2012 Smart card via OBD

SKP1000 key programmer is able to program more than 3 smart cards to Land rover Freelander 2 pre-2012 via OBD. Here is the little guide on this. Check below.

Select Freelander 2 (-2012)
(SKP1000 is also able to program smart card for Discovery 4 (-2012), Range Rover (-2012) and Evoque (-2012) )

Select Immobilizer system

Select Old smart card programming

SKP-1000 can also program new smart card, read VIN, read key number and erase fault code for Land rover.

Require at least 1 registered smart card,
click YES to continue

Insert registered smart card

Turn ignition switch to ON position

Configuring
Wait about 1 minute

Current key number: 1

Turn ignition to OFF position

Remove smart card

Insert smart card again

Continue to program next key?
Click Yes to continue

Remove smart card

Insert next smart card, if bounce up, insert again

Stuck the smart card into the key slot firmly

Continue to program next key?
Press Yes to continue, NO to go back

Turn ignition ON

Program success.
Done.!

http://skp1000.blogspot.com/

SKP1000 Program Smart 451 2012 Straight Remote Key

Here is the guide to program remote key for Smart 451 2012 by using SKP1000 key programmer via OBD.

Model:Smart BR451 2012 year

Key Type: Straight Remote Control Key

Device: SKP1000 tablet auto key programmer (Chinese version is CI600 Plus)