Guide to program Peugeot 308 2015 433MHz ID46 chip remote key by using SKP1000 key programmer via OBD.
(The menu is in Chinese. English language is optional)
OBD Connector location:
Step 1: Read PIN Code
Method 1: Get pin code from 4S store
Method 2: Read ECU/BSI data to calculate pin code
Method 3: read pin code by OBD key programmer, i.e VVDI2 (easier way)
Open Xhorse VVDI2 key programmer software, select PSA
Select Read Pin Code function
Read pin code success
Step 2: Program remote key
Connect SKP-1000 key programmer with vehicle via OBD connector
Select Immobilizer->Peugeot->By Vehicle
Select model: 308
Choose OBDII Connector
Turn ignition to ON position
Press Yes to continue
Enter pin code read by VVDI2
Close all doors and the trunk before programming
Press YES to continue
Turn ignition to OFF position then turn it on
Press YES to continue
Program success. SKP 1000 will prompt whether to program next key. Press YES to program next key, NO to quit.
SKP1000 will generate remote automatically after program key success.
Test the new remote key.
If the remote control does not work, turn ignition to ON position, then press the Lock button on the remote twice. It will work.
