Tuesday, October 10, 2017

How to use SKP1000 to Add 2014 Ford Fiesta Key without Pin Code

2014 Ford Fiesta has new immobilizer system which requires a pin code to access. Here’s the guide to programming key to a Fiesta 2014 by using SKP1000 key programmer without pin code.
skp1000-ford-Fiesta-1
OBD Location:
skp1000-ford-Fiesta-2
Guide:
Connect SKP1000 host with vehicle via OBD main cable
Come to Immobilizer->Ford->Fiesta 2013
skp1000-ford-Fiesta-3
Select Within pin code
skp1000-ford-Fiesta-4
Choose Immobilizer system
skp1000-ford-Fiesta-5
Choose OBDII connector
Turn ignition switch to ON position
Press YES to continue
skp1000-ford-Fiesta-6
Reading VIN, please wait for a few minutes
skp1000-ford-Fiesta-7
SKP1000 car key programmer read VIN and part numbers information.
Press YES.
skp1000-ford-Fiesta-8
Select Add a key, delete key or All key lost
(Note: All keys lost require at least 2 keys to program. Otherwise will not start car.)
Here we select Add a key.
Insert a new key to be programmed
Turn ignition ON
Configuring…
Program key success.


Manually program remote:
Turn ignition off for 4 times within 6s, and keep it on OFF position
Press on the “Lock” and “Unlock” button at the same time.  Released buttons when dashboard make sounds
Press on the “Lock” and “Unlock” button within 10s. released buttons when dashboard make sounds
Remove remote after dashboard indicators turn on for 10s.