Here’s the demo guide to program smart key on a Suzuki S-Cross when all keys lost with SKP1000 key programmerby OBD.
Key information:
Original key: 3-button smart key
Chip type: 46 chip
Frequency: 315MHz
Pin code: required
Device to program: SKP 1000 tablet auto key programmer
Guide:
Step 1.Get Pin Code
To get pin code, you need ID code and VIN.
To read ID code, you need to switch ignition to turn on the dashboard. But all keys have lost, so cannot turn on dash.
Here’s a way:
Connect IG1 SIG 7.5A on the immo box (located on the left of the driver side) to a 12V power supply to enable/force dash indicators turn on
You can read ID code when dash lights turn on
Check out 8-digit pin code according to ID code and VIN
Step 2: Program Key
Follow SKP1000 prompt to enter pin code program
All keys will be deleted, press YES to continue programming
Stick smart key to Start button but not start engine
(If start the engine, dash indicator will go off. In this case, you can follow method above to power it on again)
Program key success.
Press YES to program next key, press NO to go back.
http://www.skp1000.org/
